The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

rpmerf · 08-08-2019, 07:15 AM

From what I've read...
Should be about 3' from the closest cylinder. Too close and it gets too hot, too far away and it gets too cold. You want it at least 6" after the collector. You want ti in a piece of pipe that is straight for at least 6", as bends can interrupt flow. Should be at least 15* above parallel to the ground.

You can run 1 sensor after one header, or one after each header. Up to you. Both sides SHOULD be pretty even.

If you google around "wideband location" you will get tons of results.

08-08-2019, 07:15 AM	#2
rpmerf Registered User Join Date: Feb 2011 Location: Parkville, MD Posts: 1,024	Re: Wide band 02? From what I've read... Should be about 3' from the closest cylinder. Too close and it gets too hot, too far away and it gets too cold. You want it at least 6" after the collector. You want ti in a piece of pipe that is straight for at least 6", as bends can interrupt flow. Should be at least 15* above parallel to the ground. You can run 1 sensor after one header, or one after each header. Up to you. Both sides SHOULD be pretty even. If you google around "wideband location" you will get tons of results. __________________ 1970 C20 Custom Camper - 350, TH350 1997 GMC Suburban 1994 Acura Integra GSR 1987 Dodge Daytona Shelby Z