Think I've mentioned it earlier but I plan on using a 94-96 Cutlass column which had tilt steering, Auto on tree, and indicator with cruise.
When I started this a few weeks back there was a bolt already broken off in one of the pins so I had the local engineering shop get it out for me. After that I ended up buying in the special tool from Amazon to remove the pins and for the $10 freighted to my door it was well worth it.
The plan I come up with was to use the factory mounting style to mount the column to the truck dash but the cutlass column was a larger diameter.
I should have cut down the brackets and simply put a larger tube around both halves but by the time I thought that out I had already cut the outer bracketing of the column.
Might be time to refer to
another video.
Now I just need to remove the lower bearing and the external fork bit to pull the tube which needs extending about 170mm so I can put it all back together.
If that dosn't make sence, watch the video
