The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Henry

rodstored-72 · 12-23-2019, 12:25 PM

karl,
thanks for the reply, I will probably go with your setup as well (spectra CU730)… the truck is a 1986 2wd swb plain "Silverado". I recently mounted the 2013 4.8/4l60 using dirty dingo mounts. I initially thought to run a 2013 radi., but that was when my cohorts looked at the measurements and started thinking that a '86 radi might not be enough cooling... BTW I do have a build thread on here if interested in "reviewing it" and giving any insight as well...

thanks!!

thanks again!!

12-23-2019, 12:25 PM	#99
rodstored-72 chevy truck fan Join Date: Mar 2005 Location: Gilbert, arizona 85298 Posts: 2,003	Re: Henry - 1984 C10 karl, thanks for the reply, I will probably go with your setup as well (spectra CU730)… the truck is a 1986 2wd swb plain "Silverado". I recently mounted the 2013 4.8/4l60 using dirty dingo mounts. I initially thought to run a 2013 radi., but that was when my cohorts looked at the measurements and started thinking that a '86 radi might not be enough cooling... BTW I do have a build thread on here if interested in "reviewing it" and giving any insight as well... thanks!! thanks again!!