The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Using a Super T-10 4spd behind a GM??

rockosocko · 01-10-2020, 09:59 AM

From what he told me was, that it came from a early 60's T-bird and he wanted to install in a '65 mustang that he had at the time.
BUT knowing ford, and how they would 'change' things mid-year, it wouldn't fit his application with a modern (late 80's-early 90's) 302. can't remember the specifics.
It's a heavy little booger! need to hook up a cordless drill to it and see if I can figure out the ratio's for each gear.

I'm gonna try and log in with my phone to show pics.
It doesn't look like the GM offerings of a Super T like on Ebay etc..

If I can get a NON-SFI bell housing to work and a clutch assy that would be just peachy..

Thank you for your help.

01-10-2020, 09:59 AM	#3
rockosocko Registered User Join Date: Dec 2013 Location: N/W Mississippi 'Yall Posts: 44	Re: Using a Super T-10 4spd behind a GM?? From what he told me was, that it came from a early 60's T-bird and he wanted to install in a '65 mustang that he had at the time. BUT knowing ford, and how they would 'change' things mid-year, it wouldn't fit his application with a modern (late 80's-early 90's) 302. can't remember the specifics. It's a heavy little booger! need to hook up a cordless drill to it and see if I can figure out the ratio's for each gear. I'm gonna try and log in with my phone to show pics. It doesn't look like the GM offerings of a Super T like on Ebay etc.. If I can get a NON-SFI bell housing to work and a clutch assy that would be just peachy.. Thank you for your help.