The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 55.2-59 BBPanel

DransportGarage · 01-24-2020, 01:34 PM

Thanks for the visual explanation! I continue to have trouble fitting a Taiwanese w/s to my cab (second gasket, second windshield). As it turns out, according to the drawings shown here, it appears my cab was chopped about 3/16" at the factory. I'll be grinding the top corners of the w/s soon. As I once heard Tommy Smothers say on his show: "If it don't fit, force it!"

01-24-2020, 01:34 PM	#6
DransportGarage Registered User Join Date: Feb 2010 Location: Lebanon, Ohio Posts: 1,359	Re: BBPanel Thanks for the visual explanation! I continue to have trouble fitting a Taiwanese w/s to my cab (second gasket, second windshield). As it turns out, according to the drawings shown here, it appears my cab was chopped about 3/16" at the factory. I'll be grinding the top corners of the w/s soon. As I once heard Tommy Smothers say on his show: "If it don't fit, force it!" __________________ Bob "It won't take long and it won't cost much." '55 3100 (383/700R4)--'55 Belair Sedan (350/4-speed)--'64 'Vette Conv. (327/4-speed)--'68 GTO Conv. (462/4-speed)--'69 Cutlass Conv. (350/TH350)--'06 'Vette Conv. (LS2/6-speed) Bob's Retirement Build - My 55 TF Bob's 700R4 Build (how-to)