The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Palf70Step** · 04-16-2020, 01:32 PM

If you used some kind of clear coat /varnish/poly coat, then you will need to sand it all off first. I didn't have that issues, mine was always done with an oil based protectorant. Also, if you have chrome or stainless strips, you need to tape them off or be very careful to not get any oil on them as it will leave a stain. Mine is painted strips so it didn't seen to bother them.

04-16-2020, 01:32 PM	#174
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,725	Re: Palf's Little Blue Jimmy If you used some kind of clear coat /varnish/poly coat, then you will need to sand it all off first. I didn't have that issues, mine was always done with an oil based protectorant. Also, if you have chrome or stainless strips, you need to tape them off or be very careful to not get any oil on them as it will leave a stain. Mine is painted strips so it didn't seen to bother them. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! Last edited by Palf70Step; 04-25-2020 at 12:43 PM.