Re: Uncle Loyd's 72' C-10
Quote:
Originally Posted by sprint_9
I'll see if I can get you a picture of mine. I ran it out the side of the cab, I thought it worked out pretty slick.
Ok here are some pictures of mine. I drilled a hole out under the cowl vent. I used the stock Vintage air drain hose to get it out that far, then I bought a 90 degree fitting and ran some clear hose down out between the cab and the fender. I used a grommet and got a nice press fit so everything is sealed good, I also used clamps on everything so it wont fall apart with time or leak. I haven't used it yet but everything has fall so it should work fine.
|
Thanks for the pictures Sprint, I believe I like your design the best!
__________________
Brian
1972 C10, "Loyd", LWB to SWB, 5.3, L83/6L80e, 4:11 Tru Trac, Air Ride, VA, DD, 20" Coys, 4 wheel disc, A quick LS swap turned into a 6 year frame off resto-mod.
|