Quote:
Originally Posted by mongocanfly
All the way thru your video I was hollering.. NO NO NO..then you added that last brace to the pinion..
I know your limited by space..With your top bars at the flat of a angle I'd take the coilovers off and check your articulation
|
Certainly has taken a lot of thought and once I started building I could tell there was no strength in the horizontal bar. Most of the rigidity is now coming from that bolted section on the front.
I do have another issue though, maybe you have some input. I measured my angles and I have 35, 110, 35 degrees on the upper arms. I'm told that is too wide to be successful, but can't find any details on what it should be.