Quote:
Originally Posted by Root2812
Marc,
Did you have any clearance issues with the master cylinder now that you have your transmission and exhaust in? I'm looking at the CPP kit which is similar physical size to the one you got. How far does the lowest point of the booster/master extend below the frame rail or inward? If you can help me with those two measurements I can figure out if it will work with my set up. I really want to avoid a master on the firewall.
Btw, Your burb is looking awesome.
|
No real clearance issues. We did have to kick the exhaust down on the driver side to give more room between the exhaust and the master cylinder. My measurements wont do you any good because I used a Wilwood proportioning valve with e bracket. This is the lowest and most inward item.
Thank you
Marc