Quote:
Originally Posted by dag19
I would like to run E85 since I hear you get more out of it that way. The trick will be finding somewhere that sells it around here in western NE. Where at in the fuel system should I mount the sensor?
For injectors I intend to go with Deutschwerks EV6 95lb/hr injectors. I was looking at a Boyd's Welding tank with an Aeromotive Stealth 340 fuel pump. Would that system suffice?
|
sorry didn't see this till now.
If using a return style system the sensor you'd want on the return side...it's 3/8 line size.
If you are running dead head setup you can run the supply fuel thru the sensor if needed...but if you are planning larger supply lines -8AN then the sensor would be a restriction.
I'd skip anything Deutschwerks and look for a real Siemens or Bosch injector, 80#/hr
that 340 pump sounds good...I've also used Walbro 450 with good success on E85