[msg]

Originally Posted by roll_the_dice

I have an HEI distributor and am using the Bosch/sunpro retro tach. Here it is in my gauge cluster...I need to still paint the stem orange, but it looks good in the cluster I think.

That does look good! There is alot I hope I could do with my cluster before I get it reinstalled. One is the tach, a vacuum if possible, jockos tandem lock light conversion to a park brake light, and the voltmeter replacement from the ammeter I have that is shot. Hope I can pull it all off and not mess up too bad.

Originally Posted by The Rocknrod

You may have a problem with some tachs. There is an explanation here, not to difficult to overcome - https://www.americanautowire.com/vie...c-distributor/
Once you read that, here is a part (depending on your tach) - https://www.glowshiftdirect.com/hei-...signal-filter/

Thanks RocknRod, I did see a filter on Classic Parts but it was for computer controlled vehicles. Ill check with American Autowire since I bought the new wiring harness from them.