The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Starting 1966 Factory Short Bed Build, Bagged, 383 Stroker and Muncie M20 4-Speed

Paul Y · 08-04-2020, 06:39 AM

I am a neanderthal compared to what you have achieved so far, therefore if I can cut in a donor panel to my door striker panel you can do the same with the hinge side!

Must admit that the great and the good from this very board provided me with the encouragement, you can see my efforts here.

http://67-72chevytrucks.com/vboard/s...=658621&page=6

Good luck, looking forward to seeing you throwing sparks and sticking bits together with the sparkly stick.

P.

08-04-2020, 06:39 AM	#234
Paul Y Registered User Join Date: Jul 2013 Location: Essex Posts: 936	Re: Starting 1966 Factory Short Bed Build, Bagged, 383 Stroker and Muncie M20 4-Speed I am a neanderthal compared to what you have achieved so far, therefore if I can cut in a donor panel to my door striker panel you can do the same with the hinge side! Must admit that the great and the good from this very board provided me with the encouragement, you can see my efforts here. http://67-72chevytrucks.com/vboard/s...=658621&page=6 Good luck, looking forward to seeing you throwing sparks and sticking bits together with the sparkly stick. P. __________________ Woody's Build - http://67-72chevytrucks.com/vboard/s...d.php?t=658621 If it goes wrong, I blame the Internet...