The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

RJC · 09-17-2020, 07:45 PM

I need to get truck on the lift and lift occupied at the time. The right side the spring sits center of pocket.

I didn't take any measurements prior to taking apart.

All I know is if I measure frame to floor. Both sides are even but if I measure from inside pockets of spring. The left side is about 3/8 Lower which makes a big difference where fender lip rubs on tires

09-17-2020, 07:45 PM	#14
RJC Registered User Join Date: Nov 2008 Location: Olympia, WA Posts: 47	Re: Spring spacers I need to get truck on the lift and lift occupied at the time. The right side the spring sits center of pocket. I didn't take any measurements prior to taking apart. All I know is if I measure frame to floor. Both sides are even but if I measure from inside pockets of spring. The left side is about 3/8 Lower which makes a big difference where fender lip rubs on tires