Quote:
Originally Posted by SCOTI
This would definitely work if it's a simple straight shot to the steering box. Since you have R&P steering, verify that things will clear if you take that approach. You should be able to put a U-joint @ the rack & use a piece of tubing/wooden rod as your shaft. You need to keep working angles @ 30° or less.
|
Perfect. Thank you sir. They sent 2 u-joints and dbl d shaft with it. I went with Stock Column or 3/4 DD on the R&P. Nice thing is that they sell 3/4" to 1" u-joints if needed. The more i was looking into it, typical is 30" with the rack... but i will see about measuring just to make sure.