Re: 72 C20 LS Swap/Build
Some recent work on the truck.
Modified the fuel tank to fit the 09 Silverado fuel pump. I had a 1/4" thick steel ring waterjet cut to weld to the tank which would allow the pump to be bolted down. The tank didn't have enough of a flat area to mount it, so a new pan was made and cut into it. Bolts were welded into the pan through the ring which act as studs to mount the pump. The ring wasn't really necessary, but reinforces the pan to provide a strong mounting location. The original 72 fuel sender was reused since it fit in the sender hole in the tank. The lines were brazed shut since it won't be carrying any fuel.
|