[DM72C20]

More work.

My plan to run a long line to the original filler in the cab won't work due to the slope required and clearance for the suspension. So it is being routed to be behind the driver side wheel well on the side of the inner bed panel. There will be a steel tube that makes its way to the filler neck on the tank along with a Gates rubber 90 to connect it.

This is a work truck for me, so having something straightforward and functional is more important than hiding it behind a taillight or having a hole through the bed floor. I also didn't want to cut into the bed side to install a door since that would mean re-painting the truck which I cannot afford, nor want to do. It will be painted the same blue at least.