[HO455]

Originally Posted by Rich72C10

I also got in the mail today the replacement Vacuum Canister from TSP. This thing won't hold vacuum either. I have to keep pumping just to get near 15 - I think it leaks more then the one on my TSP distributor!

The Pertronix I pre-tested to 15hg can it held that for well over a hour. I guess I am glad I went with a new distributor.

With the Pertronix I am getting ~17hg (up from ~15hg) vacuum when the engine is running at idle. So I ganged a good 1~2hg with the new distributor.

I also swear my oil pressure is running to normal levels of my stock gauge - before I'd always seem to be at the 2/3 to near H mark on the oil gauge (especially before warm up). Though I haven't any clue why a new distributor would make a difference with the oil gauge readings. Kind of scares me that the oil gauge reading pattern changed. Though it's not like it is ever reading to the L mark (far left) of the gauge.

The oil pump is driven by the distributor. If there is a lot of play in the teeth and/or in the pump drive shaft the pump can flutter which might be noticeable on your guage.