Quote:
Originally Posted by DransportGarage
Personally, I would do it myself if I had the lathe. You will get much less chatter from the real part if you can use an inside chuck on the pulley.
|
Good point. I have way too much stick out but I didn't want to cut it and waste it. Is it necessary to come in at an angle like cutting threads? I will put the 4 jaw on for the real part from the inside. I think on a 60 degree thread you come in at 29 degrees so maybe 19 degrees? Another big question is if I pull this off, should it be polished or black like the other 2 pulleys. The head and valve cover will be polished and the 6-71 and carbs are polished. I will have to call them to find out what finish is on there now.