Re: LY6/TR6060 Swap from a 5.3/4L60E
Just to update, I ordered an wiring harness off ebay. one of the cheap ones, but its actually ok. the throttle pedal is not responding, but it wasn't responding with my jerry rigged harness. the ecm is mounted, and I started wiring for the relays, check engine light fuel pump, etc. that stuff will go quick. The transmission are connected but I bought a cooler for the tr6060 to keep the transmission temps cooler. the drive shaft seems to have some interference with the cab as it slides thru the loop hole. I cant install the rear of the drive shaft. to clear the cab I think I gotta cut a recess on for drive shaft to have clearance.
|