The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - DIY Door Panel

Peanut74 · 05-07-2021, 09:19 PM

Thanks guys, you gave me some good options to look into. I like the magnet idea as we used that setup to hold gaskets in place on water heater doors. They had oil and grease on the metal and noting would stick to it. Hadn't thought about using then on the door card.

Sorry about the late response as the tornado blew down trees in the neighborhood. Took some time to get them all cleaned up.

05-07-2021, 09:19 PM	#10
Peanut74 Registered User Join Date: May 2018 Location: Prattville, AL Posts: 590	Re: DIY Door Panel - Questions Thanks guys, you gave me some good options to look into. I like the magnet idea as we used that setup to hold gaskets in place on water heater doors. They had oil and grease on the metal and noting would stick to it. Hadn't thought about using then on the door card. Sorry about the late response as the tornado blew down trees in the neighborhood. Took some time to get them all cleaned up. __________________ -------------------------------------------------------- 1967 C10 "Snowball" (Currently in a million pieces down from a bazillion) 1989 Toyota DLX pickup "The Hulk" 2012 Jeep JKU "Crush" 1976 Chevy short bed with a 327 and 3 on the tree (Sold it to buy the Blazer) 1971 Chevy Blazer (Sold it)