The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Anti-Window Rattle Seals

**Rich72C10** · 05-08-2021, 12:59 PM

I bought a window seal kit (GMCPauls) and I am having a bear of a time with the Window rattle kit (chrome trimmed). The best that I can tell the bottom window grove as it comes up it can't get over the new Anti-Window Rattle Seals. This is on top of these things were two long and I had to trim them.

What am I missing here? At this point I am reverting to the old outer seal and the new inner is still giving me fits - I have to push the window out with my palm of my hand, near the triangle to get it over the new seal.

05-08-2021, 12:59 PM	#1
Rich72C10 Mr. Cheyenne Join Date: Jun 2020 Location: Kyle, Texas Posts: 1,644	Anti-Window Rattle Seals I bought a window seal kit (GMCPauls) and I am having a bear of a time with the Window rattle kit (chrome trimmed). The best that I can tell the bottom window grove as it comes up it can't get over the new Anti-Window Rattle Seals. This is on top of these things were two long and I had to trim them. What am I missing here? At this point I am reverting to the old outer seal and the new inner is still giving me fits - I have to push the window out with my palm of my hand, near the triangle to get it over the new seal. __________________ Richard *'72 Chevy C10 Cheyenne Super WHT/MED BRONZE/WHT SBC 350 \| TH350 \| LWB \| AC \| Buddy Seats Upgrades:** Tilt \| Front Sway Bar \| Radio \| Sliding Window \| Bed Spare w/Lock Bed Rails \| Full LEDs \| Courtesy Lights \| Tachometer \| Glovebox Lock & Light \| Head Light Relays \| *Upgraded Fully Super Trim