|
Re: Sway bar on a 63 with a later model cross member
Quote:
Originally Posted by Asshat
I don’t think so; it’s a good 4-1/2” too short from the original mounts. I can see making some holes to mount, however, it would then come too close to the idler and pitman arms.
Just not going to work.
|
When the sway bar is being installed, the suspension needs to be compressed @ ride height (it's normal position). They way you are set-up in your images, it's extended.
Was the bar you pulled off & sold w/the previous suspension factory installed & similar to the unit you're installing w/the later model year x-member? I never knew 63's came w/sway bars but I suppose they could have.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG
Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....
Cubic inches is like Indiana Jones with a cheap pistol.
|