mocked up the air compressors with the new backing plate, just need to make the tabs that weld into the fuel tank mount channel.
got the throttle pedal in, and the high beam foot switch in.
also got the steering in!!! I've been wanting to see this together for a while. it's super close to the engine mount bolt and the shock tower, but clears by enough. it's also like 1/2deg before internal contact in the joint at the column, but is still smooth. the heim mount shouldn't flex much
EDIT: ... i'm going to have to clearance the shock tower for chassis flex clearance ...
Edit 2: change flex to torque twist at launch
