Seat belts, also from the Honda Civic. 3x3" 1/8" Shoulder mount washer, to be welded in from behind:
3x3" 1/8" Floor mount washer, to be welded in from behind:
1-1/2" x 1/4" "L" bracket:
Belts mounted (yes, I'll make a cover):
Also re-fabricated the turbo oil feed "T." The old one was too short (the turbo feed hindered the cam sensor connection), and did not have any way of removing it (no hex).
Old and busted (left), vs soon-to-be-new-hotness (right, unfinished):