Quote:
Originally Posted by LockDoc
 to the board...
Does your rear window have the stainless trim around it? Quite a few of the guys and gals just cut the rubber around the glass and order a new Precison brand replacement rubber seal. If it has the trim you have to be careful which seal you get as there are two different ones.
I have taken them out without cutting the seal and re-used them but it is not the easiest thing to do.
LockDoc |
Pretty sure the rear window trim is the same on all the years. Would be good to confirm that for people reading. While everyone may not have access. Some good pump type glass suction cups are great on the inside when you are working the gasket in. Especially true if you are doing it yourself.