The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 73-75 Low Back Bucket Seats & Console Restoration

**smupser** · 08-21-2021, 01:51 AM

One thing I forgot to add. Kens brackets are setup for the earlier style of low backs which has the rear mounting hole spaced at 3.75 inches vs the later style which are spaced 5 inches apart. He is in the process of developing a hybrid bracket that will work on both, but the current solution if you have the later seats and utilize his brackets are to relocate the inner rivnut to space at 3.75 inches. And as far as the drivers side slider, you can just use a bench seat slider assembly which is basically the same thing.

08-21-2021, 01:51 AM	#25
smupser Active Member Join Date: Jan 2008 Location: Escondido, CA Posts: 160	Re: 73-75 Low Back Bucket Seats & Console Restoration One thing I forgot to add. Kens brackets are setup for the earlier style of low backs which has the rear mounting hole spaced at 3.75 inches vs the later style which are spaced 5 inches apart. He is in the process of developing a hybrid bracket that will work on both, but the current solution if you have the later seats and utilize his brackets are to relocate the inner rivnut to space at 3.75 inches. And as far as the drivers side slider, you can just use a bench seat slider assembly which is basically the same thing.