The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - anybody using Porterbuilt control arms with a No Limit sway bar?

Dagobah · 09-17-2021, 08:51 PM

We are wondering about two things: what kind of endlinks to use, since the endlinks provided with the sway bar have rod ends, but the tab on the Porterbuilt control arms are horizontal. It should be easy enough to find some endlinks that will work, but someone mentioned a loss of articulation.

The other thing is the difference in width: the No Limit sway bar is 43.25 inside to inside, but from what we measured, the tabs on the control arms will be around 41.5. Do y'all think that will be a problem?

09-17-2021, 08:51 PM	#1
Dagobah Registered User Join Date: Nov 2014 Location: shreveport, louisiana Posts: 28	anybody using Porterbuilt control arms with a No Limit sway bar? We are wondering about two things: what kind of endlinks to use, since the endlinks provided with the sway bar have rod ends, but the tab on the Porterbuilt control arms are horizontal. It should be easy enough to find some endlinks that will work, but someone mentioned a loss of articulation. The other thing is the difference in width: the No Limit sway bar is 43.25 inside to inside, but from what we measured, the tabs on the control arms will be around 41.5. Do y'all think that will be a problem? Attached Images