|
Re: Temp sensor/ gauge not reading....
I guessing the sender is the one in the pic. It looks rust I would clean it with Dremel Tools and small wire wheel on as Accessory. Maybe emery cloth if you do not have the tool. Then re-check the gage to see if working if not make sure the wiring is not broken has a good clean contact. Then do one check at a time till you find out where the problem is. But looking at how rusty it looks I would take it out clean it on a beach wire wheel.
__________________
 1977 REG cab Long Bed with a 1984 Front Clip, 82 305 .60 over 9.0.1 flat top pistons, 4bbl, TH350, w/84 SS-intake & cam , w/ 1977 big block rad, 1975 gear box, 1984 master w/ metric fittings top & SAE fitting @ portion block, 1975 3.42 gear open diff. Duel 77-87 Factory air cleaner, duel inlet from rad support . Down sized 9' to new 8' Steel flat bed
Was a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change.
|