So after work I got some free time as Sally was too knackered to come here for a few hours and dinner.
Perfect.
So I started cautiously…….
MAGIC !!
Then the second one, needed the press to just seat is as deep as possible.
Then onto the famous Void Bush
Bit of white Lithium grease, and all the sleeves got traditional Copper Slip to help them resist rust for as long as possible.
Once all the bushes were fitted, I removed the lower arms, one at a time, not knowing how the Anti Roll Bar would react once released, it was easier than I thought.
Fitted the new to me lower arms and upper arms,
Job done by 7.15 almost dark.
Next job…….
Front end.