Re: 1953 3100 "Honey-do"
Last weekend I decided to work on the bed inner tubs. I went to the local trailer supply store and bought two fenders. After some measuring, I decided that making the inner tubs about 3.25" wide would work for my needs. Cutting up good fenders was a little painful, but I don't have the tooling to get the rounded corners that I wanted.
Measured a few times, marked with tape, and went to cutting with the cutoff wheel. Also cut out a semi-circle of 16 ga and bent a 3/4" lip on it for the face and tacked it all together.
|