The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

sntrym95 · 11-02-2021, 10:07 AM

I did this on my old 95. You have to drill the inside holes and use fender washers on the underside. Pretty easy though. Don't forget to plug the holes in the transmission hump.

11-02-2021, 10:07 AM	#4
sntrym95 Registered User Join Date: Jan 2006 Location: Big Pine Key, FL Posts: 748	Re: Bench To Buckets I did this on my old 95. You have to drill the inside holes and use fender washers on the underside. Pretty easy though. Don't forget to plug the holes in the transmission hump. __________________ Mike