Quote:
Originally Posted by CC69Rat
What color is your foam pad? The pad might be more of an aggressive cut than you need for final polish. There are varying grades of foam pads too. Ex. Blue, White, Black they all have their purpose.
|
I was using blue (medium) when I started the thread. After the advice here, I used a wool pad, and then an orange (medium heavy) foam pad combined with the meguires. m100 heavy cut compound and am getting better results. I also turned my RPMs up to around 2500.
I believe my core problem was too soft pad, too light compound, too low RPM and I wasn’t really buffing anything down.
After the orange pad I use a blue and then a black with a lighter compound and it seems to be doing the trick. I’ve paused on this effort to try and finish my paint work but will pick it back up soon.