Quote:
Originally Posted by 72c20customcamper
It is relatively small as it sits but once you start cutting it will be much larger. I'll bet once you start cutting it will be well up into the firewall floor pan pinch weld . Mine was just a bit till I started working it . I made all the pieces by hand with 16 guage sheet metal . I wouldn't go higher than 18
See your in Wappingers falls I have a house in the Riverview area off of Channingville rd .
|
That’s pretty nice work Mark. I did the same repairs on both sides to my K20 along the lower firewall pinch weld and all four floor supports, and inner/outer rockers. It’s a pain in the ass but not hard to do. I used actual patch panels though.