Re: QA1 install on my Sons Truck. (Pics)
This is a great thread.
Finally some real world feedback on the coilover shock hanging low out the bottom of the lower control arms.
I’ve seen pictures and have ask others, but never got a response.
I think a coilover 60-87 c10 chassis has to have the front crossmember located higher in the frame rails to gain ground clearance.
RideTech and QA1 are still trying to get by using the stock crossmember,… which is fine unless you want a low ride height.
Of course there are other options like RoadsterShop, Porterbuilt, GSI, etc. that can solve these problems.
|