Re: Making a stock height truck handle a little better
SCOTI,
The alignment specs on the machine printout want the stock specs. I have requested -.5* of camber.
I also looked back through some old pictures, and it looks like I put the UCAs back on yesterday exactly how I had pulled them off. I believe the previous owner had already put them on the wrong sides, which also explains why the truck had so much positive camber when I first purchased it that the shoulders of the tires were worn out bad. Hopefully my mom can find the folder of all the stuff I did to the truck early on and that the alignment printout from the first alignment I did 5 years ago is still in that folder
__________________
Christian Carpenter
1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit
1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed
1995 Dodge Dakota Sport
"I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson
|