Quote:
Originally Posted by DeadheadNM
The 90 degree bracket was added by a prior owner and should be removed to allow fitment for the bedside to tailgate seal and it’s bracket.
There is a captured nut/nutsert that should be in place on the bedside to affix the top to bedside bracket. These commonly are broken loose/missing.
Can’t recall the bolt size off hand for the rear of rear seat but fwiw most 72s used a two bracket arrangement and these made use of seat belt bolts.
|
Quote:
Originally Posted by richard2717
Front brackets use 7/16x 20x 1.5" bolts
rear brackets use 1/2"x 13x 1.5" bolts
|
thanks guys. I just keep taking non original stuff of this truck
