Quote:
Originally Posted by PGSigns
I think the tank is to far back. The three I have done I removed the small cross member that is in front of your tank and left the rear one in to protect the tank. The bed rail is in between the vents and the filler. This will be more important if you put an efi pump where the plate is.
Jimmy
|
I appreciate the response. My next step was to move it forward and see what the next conflicts are. I think I can crank the vent down and clear the bed support. The filler is going to split the bed strip no matter how I position it so I will have it moved by someone local. I didn't get any response from Boyd welding. I guess it's a sign of the times.