View Single Post
Old 01-21-2022, 12:29 AM   #255
SCOTI
Registered User
 
SCOTI's Avatar
 
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,926
Re: "Sweet Pea" 1975 Cheyenne 20

Quote:
Originally Posted by ShortHaul View Post
So... After reading tons of info and asking a million questions, I've decided my fuel system setup, for now...

Spectra GM1C tank (found one for $83 on the 'Zon)
Spectra FG05M Sender ($114 from Hot Rod Fuel Hose)
Spectra SP1115 190lph pump (Scored for $35.00 on Ebay)

It took a LOT of searching, but I was able to track down some decent prices on these items. The pump normally lists for $109 on Hot Rod Fuel Hose's website, and the Walbro 255, EP381 are sold out or over $100 everywhere I looked.

I'm going to get all these parts in and map out the rest of the fuel system... I think I'm going to avoid the Pollack switching valve altogether, and if I choose to add the aux tank in I'll use the transfer style external pump setup. That will allow me to run AN fittings right off my main tank to my existing return-style fuel rail.
I saw that linked reference but haven't read through the other thread yet regarding the fuel system.

As for your decision, you'll also be able to re-use the old fuel pickup/sending unit of the current tank to feed an aux external low psi electric transfer set-up. Saves a few bucks there if that decision is made.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG

Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....

Cubic inches is like Indiana Jones with a cheap pistol.
SCOTI is offline   Reply With Quote