View Single Post
Old 01-29-2022, 03:18 PM   #7
Hcb3200
Senior Member
 
Join Date: Apr 2017
Location: Suwanee GA
Posts: 235
Re: AAW factory harness question

Quote:
Originally Posted by ApacheProject View Post
I spoke with Aron from AAW, he help me figure some of this out. The confusion comes from Part numbers from other catalogs being a little different than AAW’s numbers.
1.The Pink wire actually plugged into the ignition switch.
2. The brown wire was thought to be for electric wipers but it’s not hot.
3. The light tan wire is hot and thought to be for the horn. It does have a different connector, square vs barrel type on the single black wire coming from steering wheel bearing.

I also asked about wiring the cigarette lighter but they don’t offer the harness, I probably need to start asking here about that next.

The brown probably radio if its hot only with ignition on.
The HOT horn wire comes from the HORN relay output on the fuse box goes directly to horn and is usually green on AAW kits.. You will never have the hot wire on steering wheel. The steering wheel wire provides the ground to the horn and only when button is pressed.



Tan could be gas tank gauge wire but those are usually hot when on ignition.
What kit did you buy?
and have you traced the wires back to fuse box. its usually labeled and a good indicator.
Hcb3200 is offline   Reply With Quote