The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - GRIZZ’s English 2001 S10 Extra Cab 4.3 V6 Truck

Grizz1963 · 01-31-2022, 05:43 PM

Big Milestone ???

Well, depends on what you look at.

@nickwheeler and I were talking and he said the screen support and anchoring the steering wheel would be a major milestone.

At this point one could start draping the loom and planning where stuff goes.

Relocating the air box and MAF meant I need to get some 65mm drain pipe to connect the air box and MAF Sensor.

Plus I need to order 100mm of 63mm inner diameter rubber hose to connect the extension pipe, MAF sensor and Airbox.

I also ordered a hole saw in order to cut some holes for the wiring looms to move about.

Today I bought some safety shoes……. Yes, absolutely shocking.

I must be getting soft in my old age.

My 20 year old pair eventually self destructed, and the replacement pair never stopped being real uncomfortable

So after dropping something on my foot while building the chassis……..

I am getting old.

01-31-2022, 05:43 PM	#704
Grizz1963 Registered User Join Date: Dec 2012 Location: Rochester, KENT Posts: 10,494	Re: GRIZZ’s English 2001 S10 Extra Cab 4.3 V6 Truck Big Milestone ??? Well, depends on what you look at. @nickwheeler and I were talking and he said the screen support and anchoring the steering wheel would be a major milestone. At this point one could start draping the loom and planning where stuff goes. Relocating the air box and MAF meant I need to get some 65mm drain pipe to connect the air box and MAF Sensor. Plus I need to order 100mm of 63mm inner diameter rubber hose to connect the extension pipe, MAF sensor and Airbox. I also ordered a hole saw in order to cut some holes for the wiring looms to move about. Today I bought some safety shoes……. Yes, absolutely shocking. I must be getting soft in my old age. My 20 year old pair eventually self destructed, and the replacement pair never stopped being real uncomfortable So after dropping something on my foot while building the chassis…….. I am getting old. __________________ MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE.