Quote:
Originally Posted by theastronaut
Why not just add a taller upper ball joint for the same effect?
With 1" narrowed arms (quicker angle change for more camber gain) and .50" taller upper ball joints my C10 had -1.6 degrees gain per inch of travel compared to -.86 per inch stock. You also gain camber when turning with a lot of caster so you may want to map out exactly how much camber gain you're getting to see if you actually need that much.
|
Mostly being cheap, and I love welding to get my mind off of Life's B.S.
As for the mod. I think of it as the icing on the cake of the traditional mod of moving the lower A arm forward. Needed no, but adds a little bit of confidence to the end off tire grip or your limits. What ever happens first.
I want to learn how to measure suspension gains one day. My uncle gave me a old kit he had for rebuilding rear ends. Which has the guage to measure the run out is it?
Plus I have another C20 crossmember I will mod, rebuild, and store for my future square body Suburban or crew cab. I need a matching pair. Come to think of it. I like pairs of other things too.