Quote:
Originally Posted by 1restorick
I bought the side springs from LMC and they are not identical to the OEM. I went to the junkyard and got the springs out of another truck. I did use the LMC springs as an additional spring for each side. Then I took a large piece of carpet and hog tied it to the springs for additional support. For foam, I bought a large foam piece from Legendary interiors. It was a much better quality then the LMC foam. It was actually like a piece of memory foam. I attached a couple photos. Good luck with this. The stock bench is worth the work and can be very comfortable.
Rick
|
Thank you, Rick, for the pictures and info. I'm not as concerned about the looks of the spring, but rather I want it to be functional again. I like the idea of an additional spring for more support. I will probably ask the upholstery shop about adding an extra one or two in the morning.
Did you cut the foam yourself?
I do like the bench seat and definitely want to keep a bench. I wouldn't be totally against a full foam seat either, but probably just cheaper to fix what I've got
__________________
Christian Carpenter
1963 C10 -
Frankentruck 283, Muncie 3 speed with overdrive
Overdrive wiring here
1963-ish truck bed trailer -
Half-Wit
1981 C10 -
Penny 305, th350 --> Soon to be 350, Saginaw 4 speed
1995 Dodge Dakota Sport
"I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson