Quote:
Originally Posted by LeesTruk
That looks like the emissions recirc. solenoid. It's a "normally closed" valve, so you can either remove it or leave it in place. Various vendors sell plug kits for the hole, if you remove the valve, or just use a pipe tap(if you have one of that size, I believe it's 1/4npt) and get a pipe plug for the hole.
|
Quote:
Originally Posted by Accelo
I'm not positive but you may need a plug like this.
EGR plug;
LS EGR Intake Plug
|
Quote:
Originally Posted by kev2809
yup...one on the right is for the sensor you circled in the picture you posted above. the one on the left is if you actually have an EGR valve. it would be to the left of the sensor you posted above.
|
Quote:
Originally Posted by aknovaman
ace hardware sells a rubber expansion plug for $1.69. that works. or just screw a bolt into it with a little RTV and be done.
|
Thanks all! That makes me feel better. I was really scratching my head trying to figure out what plugged into it. My harness didn't have anything that reached up there, so I was really confused.