View Single Post
Old 03-27-2022, 12:06 AM   #78
Peanut74
Registered User
 
Join Date: May 2018
Location: Prattville, AL
Posts: 590
Re: Windsheild Install OOHH my!!!

no leak test yet. I just finished cleaning up the glass.

The install was interesting to watch. The guy that did it has 30 years experience so he basically did it by himself. After he installed the cord he sprayed it down with WD-40 as he didn't have any silicone spray. He actually started pulling the bottom in first and worked his way around to the center top. I asked him if he needed my help he said no. The only issue he ran into was the passenger side corner clip came off the top trim. Took him about a half hour to fix it. The trim did come up a bit in a couple spots but he used a rubber hammer to knock the trim down and lock in. We talked some and he said the biggest issue people have is that they don't know about the second lip on the seal. They don't pull the second seal over the pinch well and the glass is not locked in place.
__________________
--------------------------------------------------------
1967 C10 "Snowball" (Currently in a million pieces down from a bazillion)
1989 Toyota DLX pickup "The Hulk"
2012 Jeep JKU "Crush"
1976 Chevy short bed with a 327 and 3 on the tree (Sold it to buy the Blazer)
1971 Chevy Blazer (Sold it)
Peanut74 is offline   Reply With Quote