Re: Project "Financial Burden": 1968 SWB C10
Thanks for the comments. I finally finished up all the wiring. I'm still working up the courage to hook up the battery and test things out. In the meantime, I worked on some smaller items that always take longer than expected. I needed to merge the parking brake cables from a Gen 4 Camaro to fit my rear brakes with the stock ends to connect at the trailing arms. The best solution I could come up with was JB welding the stock trailing arm fittings to the Camaro cables since they shared the same diameter. I also needed to rework the transmission mount which allowed me to test out my new SWAG off-road finger brake. It worked out really nice and is a lot easier than trying to bend 3/16 thick material with a hammer in a bench vice.
Last edited by Old_Truck_Fan; 08-06-2022 at 08:09 PM.
|