Re: 1953 3100 "Honey-do"
I cut the male end of the "joint" and drilled out the cable end. Once this was done, I cut both the cable and sheath to the desired length and put the end back on and then crimped the new male point end on.
Then reassembled and adjusted length. I was also able to use the gromet that came out of the floor of the donor.
Hope this makes sense. I didn't take picture of some of the steps.
Thats all for now. Thanks.
Last edited by rnrdthefox; 04-10-2022 at 09:27 PM.
|