|
Re: Front progressive rate springs?
Quote:
Originally Posted by AustinBelair
I've got 2.5" drop spindles and 1 or 2" drop springs in the front and had 4" rear springs. I replaced the rears with some 3" springs but the front us just too low. I'm not a fan on the rake.
I have Eibach lowering springs in the front now and love the way they ride and handle but they don't offer a stock height spring.
Anyone offer a progressive rate stock height spring for a 66 C10?
|
I've never heard of progressive rate front springs for these trucks. Rears were set-up that way for the varying loads possibly intended. The fronts are pretty set as far as 'weight' applied so no real need for them.
What is the spring rate for your current Eibach's?
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG
Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....
Cubic inches is like Indiana Jones with a cheap pistol.
|