Re: Headliner replacement
I've done a few. One was somewhat more porous than the others, and slightly damaged so I coated it with air conditioner duct sealant and let it dry. It made it heavier but it wasn't an issue. I also used a heavy thick plush fabric so I used floor tile adhesive to stick it. The first half I let the glue dry then pressed the fabric on, the second half I put the fabric directly on the wet glue making sure it wouldn't ooze through first. Later the dry stuck side fell but the wet side didn't. For the others I used the spray adhesive with the same result. Letting it dry as recommended it falls later, but sticking it wet it has stayed up.
This is the last one I did, my S10:
__________________
Quote:
Originally Posted by Early Cuyler
Fights begin, fingerprints are took, days is lost, bail is made, court dates are ignored, cycle is repeated.
|
|