The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Alloyvert** · 05-08-2022, 11:48 AM

To be clear, I am trying to remove the headlight engine side connector out of the rubber radiator support plug and it is not budging. I assume it is just stuck, but trying to damage the front connector.

Also could use the turn signal lever screw mounting specs. It appears it should be a #8 or 10 5/8 inch long large head screw, correct?

Thanks!

05-08-2022, 11:48 AM	#5
Alloyvert Active Member Join Date: Nov 2019 Location: SE WI Posts: 116	Re: 1964 C10 project with questions To be clear, I am trying to remove the headlight engine side connector out of the rubber radiator support plug and it is not budging. I assume it is just stuck, but trying to damage the front connector. Also could use the turn signal lever screw mounting specs. It appears it should be a #8 or 10 5/8 inch long large head screw, correct? Thanks! Last edited by Alloyvert; 05-08-2022 at 11:58 AM.