|
Re: Pressure plate
Still working on it.
I have taken the tranny and clutch out to be be sure I have not installed anything wrong, which I didn't (sometimes you wish you did, that would make it easier!). I tested the pressure plate on my basic press. It seems the fingers are moving within 0.3 to 0.5 inches. I am thinking the Hydraumax bearing is not travelling far enough (it seems it suppose to travel 0.4") to press the fingers.
I ordered a ram hydraulice bearing which has up to 0.8" travel time. We'll see!
I guess the short answer is "no"!
__________________
1953 GMC 3/4 ton: current project
1967 C20: 5.3 voretc with T5 conversion, 4 wheel 8 lug disc brake
1972 Nova: my 4 door sport sedan! 5.3 voretc + T5 conversion. drivable project, FUN!!
1979 Camaro Z28: 5.3 vortec conversion with build TH350: drivable project, Fun to drive
1992 Camaro RS convertible (Z28 clone): 5.3 conversion with build T5: on going project
2005 Silverado 2500, 4x4 Duramax, original owner
|